Link

Project: Link.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 215x215mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA Paramount 3D Autobot Blue Transmission Distance: 2.5 PLA BambuLab Basic Orange Transmission Distance: 5 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Beige Tran