Link (Zelda)

SPECIAL MODEL: IF YOU HOLD IT IN FRONT OF A LIGHT OR WINDOW THE LIGHT WILL COME TROUGH Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 150x150mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Cyan Transmission Distance: 3.5 PLA BambuLab Basic Blue Gray Transmission Distance: 3 PLA PolyLite Grey Transmission Distance: 1 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments Swap Instructions: Start with Cyan At layer #10 (0.88mm) swap to Blue Gray At layer #15 (1.28mm) swap to Grey At layer #20 (1.68mm) swap to Jade White for the rest.