Thingiverse
LiPo Tray
by WaFL_FPV
27
Downloads
21
Likes
0
Makes
This tray was designed to fit 10 of my Pulse 4s 1350 mAh LiPo packs. Make sure the slots will fit your batteries before printing!
A tray to hold your 10 4s LiPo packs! Designed to fit in my Lowepro QuadGuard BP X3. The dividers are a bit thin and are designed to be slightly flexible for batteries that may not fit as well. While it was designed for the non-HV variant of the Pulse 1350 4s, the HV variant should fit as well.
The slots are 33mm x 36 x 58.5mm. The entire case is 173mm x 77mm x 60mm.
A tray to hold your 10 4s LiPo packs! Designed to fit in my Lowepro QuadGuard BP X3. The dividers are a bit thin and are designed to be slightly flexible for batteries that may not fit as well. While it was designed for the non-HV variant of the Pulse 1350 4s, the HV variant should fit as well.
The slots are 33mm x 36 x 58.5mm. The entire case is 173mm x 77mm x 60mm.
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!