Thingiverse
Liru
von SheldorTeConquor
155
Downloads
154
Likes
4
Makes
### Printer settings:
cut up liru parts:
> for my duplicator I3 I used a .1 mm height
> scaled at 100%
> used both rafts and supports, no skirt (only use rafts on arms, body, hair/tail, head and body)
> 50mm/sec speed
> It's best to do 4 layers around and on top
> 20% infill
print liru:
> I used a .06 mm layer hight
scaled to 25% as a test print
same settings as above
###models:
cut up liru:
> an ~ 1/5 scale model (to ripped mesh)
>recommended for best quality if you plan to paint and fill seams
print liru:
> base model for cut up liru, a void filled and fully watertight liru
file scaled to ~ 1/10 scale of original liru
recommended for sla or printing with dual extrusion due to small parts
cut up liru parts:
> for my duplicator I3 I used a .1 mm height
> scaled at 100%
> used both rafts and supports, no skirt (only use rafts on arms, body, hair/tail, head and body)
> 50mm/sec speed
> It's best to do 4 layers around and on top
> 20% infill
print liru:
> I used a .06 mm layer hight
scaled to 25% as a test print
same settings as above
###models:
cut up liru:
> an ~ 1/5 scale model (to ripped mesh)
>recommended for best quality if you plan to paint and fill seams
print liru:
> base model for cut up liru, a void filled and fully watertight liru
file scaled to ~ 1/10 scale of original liru
recommended for sla or printing with dual extrusion due to small parts
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
