Slicer Discord
Lithopane box – 3D-Druckmodell von Thingiverse Thingiverse

Lithopane box

von luispagan
240 Downloads
148 Likes
3 Makes
Zum Modell
I wanted to make a present for my wife and I wanted to do something with lithopanes, so here it is.

You can have up to 5 lithos on this box, or maybe use one off the sides to write a message.

Print the top frame with the 4 square holes facing up, that way there is less support and easier to take it off.

Each litho should be 100mm x 100mm, and in thickness you can go up to 5mm, but better keep it under 4.5mm, just in case. Now, the only visible part is going to be 90mm x 90mm, as there is 5mm inside the grooves on the sides, top and bottom to keep it in place.

I also added a file called litho frame, which you will only need if your lithos are 3mm or less, this way you can use this as a spacer so your lithos wont rattle in the box. Scale it on the Z axis to your needs.

Regarding the light, I used what I was able to find on my local hardware store, take in consideration that the total height of the light and the socket should not exceed 90mm, the lower the better to avoid h
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen