Lithophane light box

## How to Generate a Lithophane:

1. Use [itslitho.com](https://itslitho.com)
2. Upload your picture
3. Set the dimensions to your liking. For this model, the dimensions were 100x140x3mm
4. Note that a thicker thickness prints easier as less warping occurs.
5. Note the print settings I used below, which I highly recommend

## Parts Required:

- 1x lithophane stl file (you have to generate this yourself)
- 1x main body.stl
- 1x back panel.stl
- 2x feet.stl
- 1x USB-C female plug (or any other if you prefer)
- ~30cm of 5V LED light strips 2835 (as long as it's 5V it should be fine)

## Printing:

- **main body.stl, back panel.stl, and feet.stl:** Use your preferred print settings. 0% infill worked for me on my Ender 3 V1, and it looks nicer without the infill lines. Use [Arc Welder](https://plugins.octoprint.org/plugins/arc_welder/) to prevent bumps at the curves.
- **lithophane:** Check settings below

## Assembly:

1. Print the main body.stl first to check if th