Lithophane Mobile

The mobile can be easily assembled with the offered parts as well as with wooden slats (400mm x 20mm x 5mm). The wooden slats are connected to the middle suspension. Screw in the Ethernet cable (5mm diameter) and secure it with the provided M10 nuts. Make shure to drill the hole in the center of gravity.
The suspensions offer sufficient space to contact the electronics. The 2mm cable is then led to the individual models and fixed with the end suspension.
For the mobile almost all existing models can be printed hollow (wall thickness 1.5mm, infill 0%). For the cable fixation, simply drill a 6mm hole in the center of gravity. Make a knot in the cable under the bushing to prevent it from slipping.

The following models were used:
- X-Wing: www.thingiverse.com/thing:1539394
- 3D Earth model: www.thingiverse.com/thing:2959284
- Tie Fighter: www.thingiverse.com/thing:1150625
- Mars Bars Scuttle: www.thingiverse.com/thing:872684
- Moon Lamp: www.thingiverse.com/thing:2771919
- Mille