Slicer Discord
Lithophane Stands – Modèle 3D imprimable de Thingiverse Thingiverse

Lithophane Stands

354 Téléchargements
267 Likes
1 Makes
Voir le modèle
__Update:__ Added a bunch of stands for 3mm thick lithophanes.
___________________________________________
Many more available for free at: https://www.gadunky.com/lithophane-stands/
___________________________________________

These are mainly for use with the lithophanes available on __Gadunky.com__(but work on anything that will fit in them). They hold the lithophane at an 80° angle for best viewing(the flat section with the curve should be facing the back).

Print with 100% infill in whatever material and colour you like(tested with PLA, PETG and ABS). A layer height of 0.2mm is a good balance between quality and print time on these.

The height of the lithophane must also be considered when using a stand. These have been designed to comfortably hold a lithophane with a height 1.75x the length of the stand. So the 180mm version should hold a lithophane with a height of 315mm(180mm+75%) without falling over. In practice it will hold a much taller lithophane than this, but
Source
Thingiverse
Ce qu'il faut pour imprimer: Débutant Confiance faible
Monobloc
Supports 1/3
Assemblage 0/3
Réglages 1/3
Taille du plateau 0/3
Post-traitement 0/3
Imprimante
FDM / FFF
Format de fichier
STL
Matériau
PLA, ABS, PETG
Logiciel
Cura, PrusaSlicer ou similaire
Même créateur, plus de plateformes

RetromanIE publie également sur

53 modèles supplémentaires sur 1 autres plateformes

Vérifié par correspondance des titres de modèles entre plateformes.
Pas encore d'évaluations
Pas encore de commentaires – soyez le premier !

Modèles similaires

6 Suggestions
Feed Blog Slicer Calculateur Recherche par image Soumettre Contact Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Ajouter à la collection