Thingiverse
Little Hexacopter
par hybridkunst
15
Téléchargements
14
Likes
0
Makes
The same rules as for the Qadrocopter, using 6 motors and ESCs.
Carbon rods are 8mm and 2mm.
The take off weight including a 2S 1000mAh battery is 460g. The flight time is 8 minutes. I think there is room for improvement.
The rods and the ABS-parts are clued together using acetone.
Please see the ASM.stl for the fully mounted Hexacopter. You need to place some dampers in between the main frame and the center part. The mass of the battery stabilizes the flight controller, cause they are mounted hard to each other, while the connection to the frame is softer.
Feel free to ask questions.
Carbon rods are 8mm and 2mm.
The take off weight including a 2S 1000mAh battery is 460g. The flight time is 8 minutes. I think there is room for improvement.
The rods and the ABS-parts are clued together using acetone.
Please see the ASM.stl for the fully mounted Hexacopter. You need to place some dampers in between the main frame and the center part. The mass of the battery stabilizes the flight controller, cause they are mounted hard to each other, while the connection to the frame is softer.
Feel free to ask questions.
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !