LM8UU case

This is a LME8UU case tested in metallic linear bearings.

Tevo tarantula Y axis upgrade:

This alows you to use the stock acrilic base to upgrade to dual Y rods.

You also will need 2 450x8mm rods and front and back rod holders. You can use whatever but just be sure that has the correct height. The acrilic base MUST be highter than the 4020 aluminium center profile. This design level up the acrilc base 8 mm from the center of the rods. So i recommend you to use front and back holders with a 34 mm or more height to have at least 2mm clearence between the acrilic base and 4020 profile. I am using a 42 mm height of my own. (https://www.thingiverse.com/thing:2832806)

Thing you have to print:
4 lm8uu case

Setup:
There is no need to sand anything there is a perfect fit. Holes are for M3 so are the nuts.
First of all, download or design the front and back mount you are going to use.
Mesure distances between rods.
Then do a drilling template (2D printer).
Start using a sm