Lobo

This is lobo from dc. this is based off a page from the comic book. the artist is martin emond. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 159.85x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.48mmThe Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #0086d6 PLA BambuLab Basic Cyan Transmission Distance: 3.5 #e2dedb PLA PolyLite White Transmission Distance: 5This print uses 3 unique filamentsSwap Instructions: Start with Black At layer #12 (1.04mm) swap to Cyan At layer #22 (1.84mm) swap to White for the rest. Those are just the filaments i had on hand. use whatever you want.To scale it, change the x and y dimensions, do not change the z dimension. Boost Meboost me if you like my prints