Slicer Discord
Loc Line Switch – 3D-Druckmodell von Thingiverse Thingiverse

Loc Line Switch

von OTandAT
45 Downloads
24 Likes
0 Makes
Zum Modell
I needed a wheelchair mounted, elbow activated switch for a client with very limited movement. Here is a locline mounted switch that uses a 1.5 inch push button switch from Banggood. (45mm Arcade Video Game Big Round Push Button LED Lighted Illuminated Lamp @ $2.21 ). I needed all the wires internal inside the locline and this uses a 3/4" npt connection to the loc-line. Has two parts that just press fit together. This switch has a LED light but I'm not using it. I had to bend the switch connector tabs a bit to clear but no big deal. Wire COM and N.O. (normally open) connectors for the switch. This is much lighter than the jelly bean switch mount so much less sagging with the loc-line.

Link for switch: https://www.banggood.com/45mm-Arcade-Video-Game-Big-Round-Push-Button-LED-Lighted-Illuminated-Lamp-p-1044297.html?rmmds=detail-left-hotproducts__4&cur_warehouse=CN
Quelle
Thingiverse
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Warum?
großer Druck
Einteilig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 2/3
Nachbearbeitung 0/3
Drucker
FDM / FFF
Dateiformat
STL
Material
ABS
Mindest-Druckbett
200 mm (Groß)
Software
Cura, PrusaSlicer o. Ä.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen