LocknLock Drybox

Remixed specifically for the LockNLock Easy Essentials Rectangular Food Storage 18.1 cup found [here](https://www.amazon.com/dp/B002GZZGS8?ref=ppx_yo2ov_dt_b_product_details&th=1) and eSun spools. YMMV

Used Fusion 360 and Flashprint

You will need
608-2RS Ball Bearings x4
PC4-M10 Pneumatic Fitting x1
M5x8 socket head cap screws full thread x3
m5-0.8 hex nuts x3
Teflon Tubing for 1.75 mm filament - length your choice

Measurements are set to fit the narrow handle indentation in the side so that it can be facing either direction
.
Base Measurements:
x 144.27mm - Length
y 67.39 mm - width
z 24.96 mm - height

Reorient to print lying flat. No supports

I designed rollers without curves at the ends because the box is perfectly wide enough to fit the rolls and allow very little play, so I needed the roller to reach all the way across. I printed them with supports for the inside ledge for accuracy as the rollers fit the ball bearings snugly. No raft or brim. Print 2

Th