Slicer Discord
Logitech C270 Wall Mount – 3D-Druckmodell von MakerWorld MakerWorld
Other Hobby & DIY

Logitech C270 Wall Mount

139 Downloads
32 Likes
56 Makes
Zum Modell
This is a mount for the Logitech C270 webcam that allows you to mount it to a wall. The camera can be easily rotated in excess of 180 degrees. Aside from the screws needed to fix it to a wall no other hardware is needed. The holes for the screws are 5mm wide. There are two parts, the solid part that is screwed to the wall which is intended to be printed in something solid like PLA, PETG or whatever. The part that connects to the camera is designed to be printed with TPU 95A or softer as the case has to flex a little to push-fit the camera into the mount. It will not fall out and as it is a very good fit, it will not work with harder plastics. The two separate model parts are easily connected by hooking the camera mount into the hole and rotating it to snap into place. This was made by scanning the mount point of the C270 and reverse engineering it in ExModel, after which it was imported into CAD and cleaned up a little and used to produce a generic mount. If you find this model useful
Kategorie
Other Hobby & DIY
Quelle
MakerWorld
Veröffentlicht
Aktualisiert
Was du zum Drucken brauchst: Mittel Niedrige Konfidenz
Einteilig Hardware nötig
Supports 1/3
Zusammenbau 0/3
Einstellungen 1/3
Druckbett 0/3
Nachbearbeitung 1/3
Drucker
FDM / FFF
Dateiformat
STL
Material
PLA, PETG, TPU
Nachbearbeitung
Hardware
Software
Cura, PrusaSlicer o. Ä.
Gleicher Designer, mehr Plattformen

Fyrby Additive veröffentlicht auch auf

228 zusätzliche Modelle auf 1 weiteren Plattformen

Verifiziert durch übereinstimmende Modelltitel über Plattformen hinweg.
Noch keine Bewertungen
Noch keine Kommentare – sei der Erste!

Ähnliche Modelle

6 Vorschläge
Feed Blog Slicer Kostenrechner Bildersuche Einreichen Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Zur Sammlung hinzufügen