Thingiverse
Logitech C910 Webcam Privacy Cover
par Avise
85
Téléchargements
69
Likes
0
Makes
I could not find a good privacy cover for the Logitech C910 webcam, so I made my own.
This thing is heavily influenced by the excellent [C920 privacy cover](https://www.thingiverse.com/thing:2003903) by [OnlyTono](https://www.thingiverse.com/OnlyTono/about).
The privacy cover consists of two pieces. The base goes on top of the cam and should just clip in. Depending on the accuracy of your printer if it does not clip in firmly use some double sided tape to fix it on. Mine had no problem clipping on, being printed in PLA at 0.2 layer height. The cover itself clips into the base and fully covers the lens when it is closed. I have sized it in a way that you can still see the "camera on" lights with the cover closed.
Update 11.08.2020:
Added a cover with an extended hinge.
This thing is heavily influenced by the excellent [C920 privacy cover](https://www.thingiverse.com/thing:2003903) by [OnlyTono](https://www.thingiverse.com/OnlyTono/about).
The privacy cover consists of two pieces. The base goes on top of the cam and should just clip in. Depending on the accuracy of your printer if it does not clip in firmly use some double sided tape to fix it on. Mine had no problem clipping on, being printed in PLA at 0.2 layer height. The cover itself clips into the base and fully covers the lens when it is closed. I have sized it in a way that you can still see the "camera on" lights with the cover closed.
Update 11.08.2020:
Added a cover with an extended hinge.
Avise publie également sur
21 modèles supplémentaires sur 1 autres plateformes
Vous avez imprimé ce modèle ? Connectez-vous et partagez votre make !
Connectez-vous pour laisser un commentaire
Se connecterPas encore de commentaires – soyez le premier !