Logitech Driving Force Gt Encoder fix

Hello Guys, This video is for Logitech driving force gt Encoder Fix. My encoder board was dameged. So I try to fix it. And I made this encoder design. Use ABS Filament to print parts. My DFGT encoder disk was 60ppr. But I designed 30ppr disk too. I tried 30ppr disc. And, It worked at the rear of the motor. But, 60ppr disc is more sensitive. Both of them worked. 00:00 3D Printing Settings 01:25 Prepearing Encoder mount 04:20 Prepearing Encoder Sensor 05:32 Calibration Failure 06:23 Mounting Encoder system 11:00 First test 14:13 Result What you need: -Encoder Board : CJCMU-83 https://tr.banggood.com/CJMCU-83-AEDR-8300-Reflective-Optical-Encoder-Module-Two-Channel-Encoder-Winder-Output-TTL-Compatible-Quadrature-Signals-p-1596839.html?cur_warehouse=CN I bought from here but ı think, You can find cheaper on aliexpress. https://pt.aliexpress.com/item/33000694205.html?spm=a2g0o.productlist.main.13.26ca105c3v3ALQ&algo_pvid=b50f53b9-8bad-4f3c-baf2-ad460cc00770&algo_exp_id=b50f53b9-8bad-4f3c-baf