Lombardi 59

Text added in Bambu Studio. My first attempt doing anything like this, so suggestions welcome. This print is DELICATE! especially if you are using silk filament (I use Micro Center brand silk silver; nozzle temp 220, Bed temp 65/60 ). Look at the images for print settings. High detail, =<0.12mm layer height. 15% gyroid sparse infill. Normal supports. 5mm brim. I went through a ton of failures before I got it right, and at least for me it&#39;s dialed in. Haven&#39;t had a failed print since. Of course ymmv. Good luck!