Thingiverse
Longboard Skateboard
door Opposhaw
21
Downloads
27
Likes
1
Makes
This is a 3D printed longboard based on James Bruton's design.
I used 5/16" threaded rod with nylocks on either end to hold the parts together. 8mm rod would also work.
I used 2-3" #10-32 bolts to hold the trucks on. This is the same dimensions as standard skateboard hardware except for the length.
The design has worked for me, but has not undergone any safety or endurance testing. Use at your own risk.
The wheels are 75mm x 45mm with sideset bearings, but any longboard wheels that provide enough ground clearance would work.
I used 5/16" threaded rod with nylocks on either end to hold the parts together. 8mm rod would also work.
I used 2-3" #10-32 bolts to hold the trucks on. This is the same dimensions as standard skateboard hardware except for the length.
The design has worked for me, but has not undergone any safety or endurance testing. Use at your own risk.
The wheels are 75mm x 45mm with sideset bearings, but any longboard wheels that provide enough ground clearance would work.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
