Thingiverse
Longboard Steering Stick System
23
Downloads
32
Likes
0
Makes
A little project I built by myself for university.
This is a prototype, drivable but not safe!
If you want to make one, you may have to reconstruct or modify some parts because I designed it especially for this "globe" longboard.
In addition to the printed parts you need:
2x steel plates with additional cutouts
1x 12mm riserpad for the rear trunk
1x steering stick of a kickboard (no matter if fold-able or not)
1x aluminium or metal tube (bicycle handlebar), outer diameter 22mm
2x metal strips 60x15x1mm with two 6,5mm holes in a distance of 40mm
Screws and nuts:
1x M10 allen bolt, head is grinded down to a heigth of 3mm
1x M10 self-locking nut
4x M6 screws to hold the metal strips
4x M6 distance nuts 30mm height
4x M6 countersunk screws long
4x M6 countersunk screws short
4x M6 nuts
This is a prototype, drivable but not safe!
If you want to make one, you may have to reconstruct or modify some parts because I designed it especially for this "globe" longboard.
In addition to the printed parts you need:
2x steel plates with additional cutouts
1x 12mm riserpad for the rear trunk
1x steering stick of a kickboard (no matter if fold-able or not)
1x aluminium or metal tube (bicycle handlebar), outer diameter 22mm
2x metal strips 60x15x1mm with two 6,5mm holes in a distance of 40mm
Screws and nuts:
1x M10 allen bolt, head is grinded down to a heigth of 3mm
1x M10 self-locking nut
4x M6 screws to hold the metal strips
4x M6 distance nuts 30mm height
4x M6 countersunk screws long
4x M6 countersunk screws short
4x M6 nuts
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
