Thingiverse
Longhose stick
di snarius
5
Download
5
Likes
0
Makes
This long hose stick is designed to keep the longhose streamlined when not using a canister light. It is easy to print without supports due to it being flat on the underside.
There are 2 different lengths:
160 mm
175 mm
I sliced this with PrusaSlicer using the following settings:
0.20 mm
60% infill (Gyroid)
4 perimeters
4 solid top layers
5 solid bottom layers
First layer temperatures:
Nozzle @ 228 degrees C, heatbed @ 95 degrees C
Other layer temperatures:
Nozzle @ 238 degrees C, heatbed @ 90 degrees C
Cooling:
Keep fan always on: NO
Fan speed 0-40%
There are 2 different lengths:
160 mm
175 mm
I sliced this with PrusaSlicer using the following settings:
0.20 mm
60% infill (Gyroid)
4 perimeters
4 solid top layers
5 solid bottom layers
First layer temperatures:
Nozzle @ 228 degrees C, heatbed @ 95 degrees C
Other layer temperatures:
Nozzle @ 238 degrees C, heatbed @ 90 degrees C
Cooling:
Keep fan always on: NO
Fan speed 0-40%
Hai stampato questo modello? Accedi e condividi il tuo make!
Accedi per lasciare un commento
AccediAncora nessun commento – sii il primo!
