Looney Tunes

Project: loneeyrebienelbueno con el beige.hfpPrint at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 180x135mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 3mm and the Actual Depth is 3.1mmFilaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Red Transmission Distance: 5 PLA BambuLab Basic Orange Transmission Distance: 7 PLA BambuLab Basic Gray Transmission Distance: 2 PLA BambuLab Basic Yellow Transmission Distance: 6 PLA BambuLab Basic Beige Transmission Distance: 8 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 7 unique filamentsSwap Instructions: Start with Black At layer #6 (0.56mm) swap to Red At layer #8 (0.72mm) swap to Orange At layer #16 (1.36mm) swap to Gray At layer #22 (1.84mm) swap to Yellow At layer #27 (2.24mm) swap to Beige At layer #33 (2.72mm) swap to Jade White for the rest.