Low cost magnetic held switch

#Magnetic Held Switch
Custom made (3D printed case, tractor and bat), low cost magnetic held switch. This thing connetcs a **modded three way switch to a solenoid**. The mechanism can be controlled by a microcontroller (pscockpit main board in my case). Magnetic held switches allow to have a switch which comes back to the center position when a command (from a flight simulator, for example) is received.

##**Application examples:**

>✓ F-16 Landing Gear Panel : parking brake switch (if in parking position, and engine RPM goes above 80%, parking brakes are automatically disengaged to preserve brakes).
>✓ F-16 Miscellaneous Panel: Attitude hold, Altitude hold switches. Autopilot may be disengaged if for example LDG is extended, Stall, AoA above a limit, refuelling door is open ...

##**Components list:**
>✓ [3 way Toggle switch](https://es.aliexpress.com/item/4001045210896.html?spm=a2g0s.9042311.0.0.274263c0eVjCRP)
>✓ [Small, 15N 12VDC solenoid](https://es.aliexpress.com/item/