![Low Profile Spherical Keycap v2 [Final] – 3D printable model from Thingiverse](/imgproxy.php?url=https%3A%2F%2Fcdn.thingiverse.com%2Frenders%2Fa5%2Ffb%2F3d%2Fb3%2F8a%2Fb29368505a1f490c88f0646d3a37454b_display_large.jpg&w=800&h=800)
Thingiverse
Low Profile Spherical Keycap v2 [Final]
by neurosai
71
Downloads
47
Likes
0
Makes
Low Profile Mechanical Keyboard Switch Keycap with Spherical Surface
- Tested with Kailh low profile switches
- Also included plate model for a low profile switch tester
- 0.06 mm layer height and 0.4 mm nozzle
- Supports are needed, but can affect the fitting and quality if not removed completely
- I recommend printing vertically or at a 60° angle with the horizontal. This removes the circular artifacts on the face of the keycap one would get from printing this horizontally.
v2 changes
- slightly higher and has a deeper groove, which feels better to type on overall (note photos are still v1)
- Tested with Kailh low profile switches
- Also included plate model for a low profile switch tester
- 0.06 mm layer height and 0.4 mm nozzle
- Supports are needed, but can affect the fitting and quality if not removed completely
- I recommend printing vertically or at a 60° angle with the horizontal. This removes the circular artifacts on the face of the keycap one would get from printing this horizontally.
v2 changes
- slightly higher and has a deeper groove, which feels better to type on overall (note photos are still v1)
Did you print this model? Sign in and share your make!
Sign in to leave a comment
Sign inNo comments yet – be the first!
