Lowe with Shield

FDM Print Profile (PLA)Printer Settings:Nozzle Size: 0.4mm (standard for most FDM printers).Layer Height: 0.1mm–0.2mm (0.1mm for high detail on mane and shield; 0.2mm for faster prints with less detail).Infill: 10–20% (10% for lightweight, 20% for sturdier models).Print Speed: 40–60mm/s (slower for detailed areas like the shield or mane).Bed Adhesion: Use a raft or brim for stability, especially if the model has a narrow base.Supports: Enabled (required for overhanging parts like the lion’s legs, tail, or shield edges).Support Density: 5–10%.Tree supports recommended for intricate areas to minimize cleanup.Temperature:Nozzle: 200–210°C (adjust based on PLA brand).Bed: 50–60°C.Build Plate: Glass or textured PEI with glue stick for adhesion.Orientation:Position the model upright (lion standing) to minimize supports on the face and shield.Tilt slightly (10–15°) if needed to reduce support contact on detailed areas like the mane.Post-Processing:Remove supports carefully with flush cutters.