Thingiverse

LRS-200-12v

by duckmanjbr

1 Downloads

1 Likes

0 Makes

LRS power supply case. This was designed to allow easy access to the PSU terminals as well as to allow multiple units to easily stack for a clean look. Three 3D parts are used in total: The connection side base, the access door for the connection side base, and the rear base to allow multi-unit stacking. LEDs are obviously optional.

Additional parts used to build the base:
1. 10pcs XT60E-F Female Plug XT60h XT60 Male Bullet Connector with PVC Protective Sleeve Dust Cap for RC Aircraft Drone Accessories (https://www.amazon.com/dp/B0C5X5Q1NN?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1)
2. 50pcs 12 Volt 3mm Green LED Lights Emitting Diodes Pre Wired 7.9 Inch DC 12v LED Light Diffused Colored Lens Small LED Lamps (https://www.amazon.com/dp/B07PXYYB56?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1)
3. RLECS 50pcs Plastic Lamp Bases LED Bulb Diode Holder Black Clip Panel Mounting Socket 3mm (https://www.amazon.com/dp/B0832K4SP6?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1)
4. Antrader 2pcs AC250V 10A IEC

lrs MeanWell LRS 200

Source

Thingiverse

What you need to print this: Intermediate Medium confidence

Why?

large print

Single piece

Supports 1/3

Assembly 0/3

Settings 1/3

Bed size 2/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, Polycarbonate

Min. bed size

200 mm (Large)

Est. print time

60 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Which 3D printer is suitable for LRS-200-12v?

Any FDM printer should handle LRS-200-12v just fine. It's been printed on machines like Bambu Lab A1, Prusa MK4, Creality Ender 3, Anycubic Kobra. A minimum build volume of 200 mm is recommended.

How long does it take to print LRS-200-12v?

According to the design notes, LRS-200-12v takes approximately 60 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is LRS-200-12v available in?

LRS-200-12v is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is LRS-200-12v free to download?

Yes, LRS-200-12v is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

LRS-200-12v

Add to Collection