LRS-75 Stand

I've designed this box to hold the PSU in a vertical position and use a C13 cable to power it (without button).
Also, I have protected the wires from undesired touches with a lid.
It should be compatible with all the LRS-75 series: LRS-75-5, LRS-75-12, LRS-75-15, LRS-75-24, LRS-75-36, LRS-75-48

When printing the lid, you must pause the print twice to insert 3 nuts.

### Assembly:
* C14
* 2 x M3x4 for the back of the PSU
* 3 x M3x6 for the side of the PSU
* 1 x M3 nut for the side of the PSU
* 2 x M3x8 for the C14
2 x M3 nuts for the C14
* 3 x M3x8 for the lid
3 x M3 hex nuts for the lid. They will be inserted during the print


### To do:
* Create a hole for the psu led
* Move the 3 screws from the lid to the front side for easy removal.
* The top angle from the box should be bigger to protect the wires coming from the C14 (230V). I've used two heat shrink tubes to protect them

Note: The scad file isn't printable directly. You must edit the code to show one or a