MakerWorld

Sculptures

Lu Zishen Bust

by MU/TH/ER · Sculptures

0 Downloads

2 Likes

0 Makes

Model of an bald Asian man with facial hair. Could be the Heavenly Spirit Lu Zishen from Water Margin. Simple print, under 1 hour.Boost MeMy first print, boosts welcome!

china chinese bust monk flowery monk water margin heavenly heavenlyspirit Flower Monk Lu Da Lu Ti Xia Water Margin

Category

Sculptures

Source

MakerWorld

Published

04.01.2025

Updated

30.04.2026

What you need to print this: Intermediate Medium confidence

Why?

supports needed

Single piece Supports required

Supports 2/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

Est. print time

1 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Lu Zishen Bust need supports when printing?

Yes, Lu Zishen Bust will probably need supports for the overhangs. Tree supports work well here and are easier to remove than regular ones.

How long does it take to print Lu Zishen Bust?

According to the design notes, Lu Zishen Bust takes approximately 1 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Lu Zishen Bust available in?

Lu Zishen Bust is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.

Is Lu Zishen Bust free to download?

Yes, Lu Zishen Bust is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Similar Models

6 Suggestions

Lu Zishen Bust

Similar Models

Add to Collection