lucidgloves Winder Remix

I was putting together the VR Glove by lucas on https://github.com/LucidVR/lucidgloves-hardware and saw the his winder was hard to work with so i made my own and thought that someone could use it. this is a Remix i guess because i made it from scratch and he did not post the files on this site to my knowledge.
I included the Freecad File so you can modify it.

Here is a Video on the Setup That I Found on Youtube https://www.youtube.com/watch?v=ht1vhGQ9auY

I used the CR6-SE but it was not listed.

I printed it with 100 infill but the walls are so thin i should not matter as much.

I used 50% Print Speed but the Slower the Better.

I did not use a raft as the print broke upon removal so i used a Brim instead.

Layer Height was 2.0 but if you have the Time this part is small so 1.0 if you have the Time.

I did not need to generate support i found it to be a pain and most of the Time to break the model if i used them anyway.

Everything else was PLA default.

I trie