Slicer Discord
Lucifer - HueForge – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

Lucifer - HueForge

1 Downloads
7 Likes
0 Makes
Go to Model
This portrait of Lucifer comes out beautifully thanks to the glittery purple and rich red sourced from CookieCad and ProtoPasta. All color changes are programmed into the .3mf file, but you can also use the information below to program your own color changes: PETG Duramic Black Transmission Distance: 0.2 PETG CookieCad Witchcraft Transmission Distance: 6.4 PETG ProtoPasta Blood Red Transmission Distance: 4 PETG BambuLab Basic Red Transmission Distance: 3.9 PETG BambuLab Basic Yellow Transmission Distance: 6 PETG Duramic White Transmission Distance: 0.2This print uses 6 unique filamentsSwap Instructions: Start with Black At layer #6 (0.6mm) swap to Witchcraft At layer #10 (0.92mm) swap to Blood Red At layer #15 (1.32mm) swap to Red At layer #20 (1.72mm) swap to Yellow At layer #28 (2.36mm) swap to White At layer #33 (2.76mm) swap to Yellow At layer #34 (2.84mm) swap to WhiteBorder Only Colors from here until the end. At layer #35 (2.92mm) swap to Witchcraft for the rest.
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Intermediate Medium confidence
Why?
6 colors
Single piece 6 colors / AMS
Supports 1/3
Assembly 0/3
Settings 3/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PETG
Min. bed size
50 mm (Small)
Colors
6 (AMS/MMU recommended)
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection