Luffy Hueforge

Project: LUFFY HueforgePrint at 100% infill with a layer height of 0.08mm with a base layer of 0.24mmThe Model is 200x200mm in sizeYou may print at higher layer heights below the Base Thickness of 0.8mmThe Max allowed Thickness is 3.04mm and the Actual Thickness is 3.04mmFilaments Used: #080a0d PLA PolyLite Black Transmission Distance: 0.3 #c00d1e PLA BambuLab Basic Red Transmission Distance: 4 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5 #4c5f71 PLA BambuLab Basic Blue Gray Transmission Distance: 3This print uses 4 unique filamentsSwap Instructions: Start with Black At layer #8 (0.8mm) swap to Red At layer #15 (1.36mm) swap to Jade White At layer #19 (1.68mm) swap to Black At layer #25 (2.16mm) swap to Blue Gray At layer #28 (2.4mm) swap to Jade White for the rest.