Search tips

core oneall words must appear
"core one"exact phrase
vase -lithophaneexclude a word
Slicer Discord
3DSEARCH / 2D Art / Luffy hueforge
Luffy hueforge – 3D printable model from MakerWorld MakerWorld
2D Art

Luffy hueforge

by Mon3D · 2D Art
0 Downloads
4 Likes
0 Makes
Go to Model
Luffy ONE PIECE Essendo ( colori bisognerà fare dei cambi colore.Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 140.67x250mm in sizeYou may print at higher layer heights below the Base Thickness of 0.64mmThe Max allowed Thickness is 1.76mm and the Actual Thickness is 1.52mm #536c8b PLA ESUN Grey Transmission Distance: 3.2 #080a0d PLA Esun Black Transmission Distance: 1 #de4343 PLA BambuLab Matte Scarlet Red Transmission Distance: 2.1 #c4c4c4 PLA eSUN silver Transmission Distance: 1.5 #ddd7c7 PLA+ Esun Bone White Transmission Distance: 5 #dbbba1 PLA+ Esun Beige Transmission Distance: 4 #fff700 PLA eSUN Yellow Transmission Distance: 5.6 #ffffff PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 8 unique filamentsSwap Instructions: Start with Grey At layer #4 (0.4mm) swap to Black At layer #8 (0.72mm) swap to Scarlet Red At layer #9 (0.8mm) swap to silver At layer #10 (0.88mm) swap to Bone White At layer #11 (0.96mm) swap to B
Category
2D Art
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Why?
print-in-place design · large print
Print-in-place
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 2/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Min. bed size
250 mm (Large)
Software
Cura, PrusaSlicer, or similar
Frequently Asked Questions
Which 3D printer is suitable for Luffy hueforge?
Any FDM printer should handle Luffy hueforge just fine. It's been printed on machines like Bambu Lab X1C, Prusa MK4, Creality K1 Max, Anycubic Kobra Max. A minimum build volume of 250 mm is recommended.
Does Luffy hueforge need supports when printing?
Nope — Luffy hueforge is print-in-place, so it comes off the bed ready to use. No supports, no assembly.
What file format is Luffy hueforge available in?
Luffy hueforge is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through MakerWorld.
Is Luffy hueforge free to download?
Yes, Luffy hueforge is available as a free download through MakerWorld. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Gear 5 joy boy luffy fanart
Gear 5 joy boy luffy fanart
by Corn capital creations
↓ 20 ♥ 7
chibi gear 5 luffy
chibi gear 5 luffy
by ebu
↓ 19 ♥ 2
Skeleton Luffy One Piece 3D Print Figure
Skeleton Luffy One Piece 3D Print Figure
by Trimela3D
↓ 279 ♥ 161
Monkey D. Luffy – One Piece 3D Print Model (STL + BLEND)
Monkey D. Luffy – One Piece 3D Print Model (STL + BLEND)
by ahmed2000thabet
♥ 1
Monkey D. Luffy STL – Gum Gum Power 3D Print | FDM Ready | STL + M3F | Clean Geometry
Monkey D. Luffy STL – Gum Gum Power 3D Print | FDM Ready | STL + M3F | Clean Geometry
by marcef
Luffy One Piece 4-Color Pen
Luffy One Piece 4-Color Pen
by MelouGalak3D
↓ 14 ♥ 9
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
· Impressum · Privacy
DE EN FR ES IT NL

Add to Collection