Slicer Discord
Lulzbot Mini 2 Raspberry Pi Mount (For OctoPi) – 3D printable model from Thingiverse Thingiverse

Lulzbot Mini 2 Raspberry Pi Mount (For OctoPi)

7 Downloads
7 Likes
0 Makes
Go to Model
Reconfigured the mounting tabs for the Raspberrry Pi case from CoreElectronics for use on the Lulzbot Mini 2 printer. The case now uses the two front bolts on the lefthand side, which only hold on a small bracket for a ribbon cable. I tried to use the existing part with the other holes, but the bolts ran into the printhead gantry..whoops! I wanted to piggyback on the least important bolts, in case they loosen or anything. Cables now rearwards (except power cable plugs into the top).

I replaced the stock bolts w/ 10mm long M3 ones (didn't have them in time for the picture haha).

Thanks to CoreElectronics, nlaredo, and 0110-M-P for the original design.
Source
Thingiverse
What you need to print this: Intermediate Low confidence
Single piece Hardware needed
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 1/3
Printer
FDM / FFF
File format
STL
Material
PLA, ABS
Post-processing
Hardware
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection