Lulzbot Mini Double Cooling Duct

UODATED 12/11/16 - Linked to a new 15mm blower. The original one, for whatever reason, wouldn't run at speeds below 100%. This new one has a much wider speed range. I've updated the STL files to match the new blower, which was slightly narrower than the original 15mm blower.

UPDATED 12/3/16 - Design complete! 15mm blower duct confirmed to fit and function as designed! Thanks BMEmike for building it!

If your printer needs a slight tweak in the design, please contact me.

UPDATED 11/30/16 - Fixed 15mm blower holder, downtube, and right and left duct to fit the 15mm blower. Thanks BMEmike!

UPDATED 11/28/16 - Added site link to smaller quantity heat inserts. Thanks BMEMike

UPDATED 11/20/16 - The ductright20mm and ductright15mm have both been updated to -2, I moved the nozzle away from the hot end by 3mm. It was just a bit too close for me. The down level nozzle will still work as it is in the exact same position as the stock nozzle. Please use the -2 from now on.

Added ass