Lulzbot Mini Enclosure

Trying to print in Bridge Nylon which delaminates awfully on the print bed. This cover will mitigate draughts and I will also try drying filament in the oven prior to printing. Made with Lexan available from Home Depot and Lowes in USA. Other plastics will work but Lexan cuts well with a circular saw - do not try with a plastic cutter, clamp the lexan securely when cutting and DO wear goggles. You need 4 inner and outer corners, and 14 inner and outer edge brackets which fit on the identical front and back covers. Each are 3" deep to clear the traversing print bed and are free standing. Lexan clamps hook under the printer frame to secure the top, left and right covers. Note before deciding where these clamps go make sure you closely watch the print head drive assembly movements especially when it goes through its initial homing routine. You need to keep the back left corner of the top cover clear of clamps especially or you will foul on this assembly. All brackets/clamps secur