Lulzbot Mini Raspberry Pi (Model B) Case

This case allows the mounting of a Raspberry Pi (Model B) onto the side of a Lulzbot Mini. The case is a remix of the Raspberry Pi (Model B) case with 75mm VESA mount by 0110-M-P and the mounting bracket from Raspberry Pi 2/B+ case for Lulzbot Mini by arijaycomet.

I've included 0110-M-P's original top stl file here for convenience, though the bottom piece is the only one that has changed. See 0110-M-P's original case for the source stp files.

See photos and information bellow for information on assembly hardware and mounting.

The following hardware was used to assemble the case:

2x - Sheet metal screw, phillips pan head, #4 x 1/4"
https://www.boltdepot.com/Sheet_metal_screws_Phillips_pan_head_Stainless_steel_18-8_4.aspx?Selected=5435

3x - Sheet metal screw, phillips pan head, #4 x 3/4"
https://www.boltdepot.com/Sheet_metal_screws_Phillips_pan_head_Stainless_steel_18-8_4.aspx?Selected=2298

The following hardware was used to mount the case to the printer:

2x - 18-8