Lunar phase clock neopixel version

This is just the same Arduino sketch but using NEOPIXELs instead of dotstar strips. While the Dotstar strips are amazing, they are more expensive and not strictly required in this project.

Wiring diagram is identical except the only difference is the LED strip only is a 1 wire serial protocol for NEOPIXEL and thus only D5 goes to the LED strip signal input.

Here is a good tutorial link on the differences between Dotstar and NEOPIXEL
https://learn.adafruit.com/adafruit-dotstar-leds/overview

List of libraries I installed into Arduino IDE
https://bintray.com/olikraus/u8glib/Arduino
https://learn.adafruit.com/monochrome-oled-breakouts/arduino-library-and-examples
https://learn.adafruit.com/dht/downloads?view=all#downloads
https://learn.adafruit.com/ds1307-real-time-clock-breakout-board-kit/what-is-an-rtc?view=all#arduino-library
https://github.com/FastLED/FastLED/releases/tag/v3.1.3

FYI I ran into an issue using the stock libraries from Adafruit for the graphics. This hin