Slicer Discord
Lunar Phases – 3D printable model from MakerWorld MakerWorld
Hueforge & Lithophane

Lunar Phases

93 Downloads
39 Likes
8 Makes
Go to Model
Just a nice little hueforge moon phases print. The image was sourced from an work on wikimedia commons titled “Lunar Phases” by David Warrington licensed under https://creativecommons.org/licenses/by/2.0/deed.en. I removed the border around the image and the title “Lunar Phases” because I didn't think it printed very cleanly. The layer heights are set to 0.04mm and a warning will pop up saying that may cause issues with your printer, but as you can see from the first image it didn't cause any problems with my A1. Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mmFilaments Used: PLA Spool3D Black Transmission Distance: 0.3 PLA M3D Grey Transmission Distance: 2 PLA Bambu Tough Silver Transmission Distance: 3 PLA Jayo White Transmission Distance: 6.3 Swap Instructions: Start with Black At layer #12 (0.6mm) swap to Grey At layer #22 (1mm) swap to Silver At layer #34 (1.48mm) swap to White for the rest.
Category
Hueforge & Lithophane
Source
MakerWorld
Published
Updated
What you need to print this: Beginner Low confidence
Single piece
Supports 1/3
Assembly 0/3
Settings 1/3
Bed size 0/3
Post-process 0/3
Printer
FDM / FFF
File format
STL
Material
PLA
Software
Cura, PrusaSlicer, or similar
No ratings yet
No comments yet – be the first!

Similar Models

6 Suggestions
Feed Blog Slicer Cost Calculator Image Search Submit Kontakt Discord ☕ Buy me a coffee
DE EN FR ES IT NL

Add to Collection