LW PLA Test Cube Parameter Optimization Colorfabb

Test print for Colorfabb LW PLA parameter optimization. I did not see a good way to optimize flow for Bambu printers. I made multiple profiles with different flow rates to optimize the settings for my P1S. I am unable to upload the .3mf with custom filament profiles so I can walk you through the approach.Follow the link below “Bambu Labs Profiles”. These are custom profiles from ColorFabb for bambu printers.Find and download “ColorFabb LW-PLA.3mf”.Create 9 or so different parameters with different flow rates and temperatures. You can also adjust retraction settings but I would do an additional print to dial that in.Apply the custom profiles to the 9 different cubes. I went with 230 - 250 C with flow rates varying from .35 - .55.240 C at .5 worked best for my printer but I still had stringing. I still need to dial in retraction.The photo is from Varioshore TPU. I was unable to find the photo of LW PLA. Bambu labs has a filament called PLA Aero. The approach should be very similar to dia