Thingiverse

Lyman Case Prep Xpress Drip Pan

by Technalyzed

39 Downloads

19 Likes

0 Makes

Lyman Case Prep Xrpess Drip Pan
This has a better/tighter fit than the original pan that came with it.
Printed with PETG with no supports
Designed to be a tight fit to keep brass shavings from getting inside unit.
Place the top in first at an agle then push the bottom in.
For strength II printed it with 100% infill with an Ender 2 in about 1.75 hours.
.

Source

Thingiverse

What you need to print this: Beginner Medium confidence

Why?

no supports

Support-free Single piece

Supports 0/3

Assembly 0/3

Settings 1/3

Bed size 0/3

Post-process 0/3

Printer

FDM / FFF

File format

STL

Material

PLA, PETG

Est. print time

75 h

Software

Cura, PrusaSlicer, or similar

Frequently Asked Questions

Does Lyman Case Prep Xpress Drip Pan need supports when printing?

No supports needed for Lyman Case Prep Xpress Drip Pan — it's designed to print clean off the bed.

How long does it take to print Lyman Case Prep Xpress Drip Pan?

According to the design notes, Lyman Case Prep Xpress Drip Pan takes approximately 75 hours to print at standard settings (0.2 mm layer height, 15% infill). Actual print time varies based on your printer speed, layer height, and infill density.

What file format is Lyman Case Prep Xpress Drip Pan available in?

Lyman Case Prep Xpress Drip Pan is available in STL format. These files can be opened and sliced using free software such as Cura, PrusaSlicer, Bambu Studio, or OrcaSlicer for FDM printing, or ChiTuBox and Lychee Slicer for resin printing. The download is provided through Thingiverse.

Is Lyman Case Prep Xpress Drip Pan free to download?

Yes, Lyman Case Prep Xpress Drip Pan is available as a free download through Thingiverse. Always check the license on the original platform to understand commercial use, remixing, and attribution requirements.

No ratings yet

No comments yet – be the first!

Lyman Case Prep Xpress Drip Pan

Add to Collection