Lynx Den

STLs Lynx Den: Four parts - Grass, Dirt, Log, and Nest all are single color print parts. The dirt prints backside down. These will need to be glued together, Place the log in the slot (from the front) in the dirt first, and then slide the grass (From the back) on top. The log is smooth on the areas where it is against the dirt and the grass. Print Settings: Print in Place No Supports needed Arachne walls 2-3 walls 5-10% infill If you have adhesion issues, try a brim, glue stick or Aquanet hairspray Test printed down to 70%, YMMV.