m 69 blooper

this build requires
1 moss berg stock and screw
1 ar trigger and spring
1 ar hammer and spring
2 trigger pins
1 selector, detente, and spring.
1 AR grip
1 ar firing pin
1 2" long #10 sex bolt
1 1" long 6x32 socket head screw (for firing pin)
1 3/4 long 6x32 socket head screw (for ejector)
1 7/32 x 2" long compression spring (for firing pin)
1 5/16 x 2" long compression spring (for plunger)
1 3/8 x 2" long compression spring (for ejector)
1 1/4 x 5/8 long compression spring (for latch)
1 5/16 nut (for securing the stock to the frame)
1 3/4" washer with a 1/8" hole

edit: i turned the trigger guard into a separate piece because its brittle and ugly if printed as part of the receiver, it requires an additional 6x32 1/2" socket head screw, and a 6x32 1/2" flat head screw

the spacer is required if you want to mount a mossberg pistol grip to the frame, an additional 2" 5/16x18 screw is also required for this.

if you assemble the ladder sight, it requires an addit