Thingiverse
M10 Fidget spinner
por Backmann
9
Descargas
5
Likes
0
Makes
I have been printing a few spinners for my son and daughter found here on thingiverse.
Now it was time to try designing one by myself.
It's using a standard 608 bearing and 3 M10 nuts.
It's a bit bigger than most spinners. Not for small hands.
I opened the bearing cleaned it with benzin. The result was astonishing.
This spinner kept on going for 3 minutes and 15 seconds :-0
I use the caps from this spinner by @Mr_MinerAl
https://www.thingiverse.com/thing:2315392
They work really great and lock nicely in place with no need for glue.
Now it was time to try designing one by myself.
It's using a standard 608 bearing and 3 M10 nuts.
It's a bit bigger than most spinners. Not for small hands.
I opened the bearing cleaned it with benzin. The result was astonishing.
This spinner kept on going for 3 minutes and 15 seconds :-0
I use the caps from this spinner by @Mr_MinerAl
https://www.thingiverse.com/thing:2315392
They work really great and lock nicely in place with no need for glue.
Backmann también publica en
2 modelos adicionales en 1 plataformas más
¿Has impreso este modelo? Inicia sesión y comparte tu make.
Inicia sesión para dejar un comentario
Iniciar sesiónAún no hay comentarios – ¡sé el primero!
