M2 FPV Cam holder

Modified the file of DanO_FPV to hold a micro cam in front of standoffs, in case build is too tight with stack etc.
Distance between standoff and cam hole (m2) is 10mm
Optimized for m2 standoffs with 3,2 - 3,4mm outer diameter (might have to drill that hole a bit larger)
Printed in TPU - Saintsmart

on Anet A8
with 215° hotend and 50°bed
speed 40mm/sec.
retract 1.5mm /retr.speed 25mm/sec
infill 80%
no supports

It has some minimal edge at the hole, but Cura says it's watertight. Gave my best on Tinkercad ;-)