Thingiverse
M2 knob
door a_v_p
3
Downloads
6
Likes
0
Makes
This is a knob for M2 screw with 3.5mm head. I made it specifically for the replacement screw for a caliper.
FreeCAD file is attached. Probably you'll want to increase the inner diameter of the hole to 3.7-4.0mm if you want to glue the screw head to the knob as I found that the actual hole diameter in the printed part is 3mm instead of 3.5mm. I just heated the screw and melted its head into the knob and that worked out fine for me.
FreeCAD file is attached. Probably you'll want to increase the inner diameter of the hole to 3.7-4.0mm if you want to glue the screw head to the knob as I found that the actual hole diameter in the printed part is 3mm instead of 3.5mm. I just heated the screw and melted its head into the knob and that worked out fine for me.
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!
