M240 Incinerator

1:1 Aliens M240 Incinerator unit.

(My usual disclaimer that this is deeply flawed, but fully printable, model)

Split into several sections to allow printing on sensible sized printers. Most joints have locating lugs etc but not the receiver halves. Superglue should be adequate for assembly. Mine was designed as a water gun with pump and battery and it works - but the range isn't great, six to eight feet from level roughly. (If anyone wants the parts or a video let me know but it's not as cool as I'd hoped.) The gas tank screws in and so is removable for transport/storage and of course for filling. The receiver lid needs four screws self tapping screws to attach. The lever/trigger needs a spring (ideally) and either a bolt or short section of bar/rod to rotate around.

I have checked all the parts in CURA/Qidi print but if anyone experiences any problems let me know and I'll see if I can help. Some models, the nozzle and filler I think, don't need supports, others will. Mine was print