Thingiverse
M365 Foot Step
door vallety
14
Downloads
17
Likes
0
Makes
M365 foot step.
Recommended printing Top plate using PETG 100% infill and Base using 100% infill common PLA.
I used one M4x20 screw and two M5x10 washers for each base hole in order to strong attach it to the frame.
Aliexpress version never tested but I guess it will fit properly.
Hot Melt Inset Brass Nuts (M4x7x6)
https://www.aliexpress.com/item/1005002631444577.html?gatewayAdapt=glo2esp&spm=a2g0o.order_list.0.0.21ef194dLegVT4
Recommended printing Top plate using PETG 100% infill and Base using 100% infill common PLA.
I used one M4x20 screw and two M5x10 washers for each base hole in order to strong attach it to the frame.
Aliexpress version never tested but I guess it will fit properly.
Hot Melt Inset Brass Nuts (M4x7x6)
https://www.aliexpress.com/item/1005002631444577.html?gatewayAdapt=glo2esp&spm=a2g0o.order_list.0.0.21ef194dLegVT4
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!