Thingiverse
m42-to-eos-mount
door funlw65
169
Downloads
118
Likes
4
Makes
__The updated and final version!__
M42 lens to Canon EOS body adapter. Made as a remix from three "things". Many thanks to the authors. Well, it will take a while until I will be able to test it. If there are courageous, please test it...
Adapter assure a flange distance of 45.5mm, needed by M42 lenses to focus to infinity (EOS flange distance is 44mm so, it adds 1.5mm), but, as I have zero experience with 3D printing, there is no dimensions tolerance. However, this is intended to be printed on Prusa i3 using Cura 3D software, where material is PLA and the profile is set to High Quality (0.06mm), infill %100.
Now, what I got from those three things:
- from @SkyRzn I got the entire EOS bayonet, cut the extension tube and kept only 1.5mm from it; https://www.tinkercad.com/things/eZ0xn72o6Zj/
- from @jeng28 I got the secure hole and the index hole of the EOS flange; https://www.tinkercad.com/things/0lSVNIOYrTU/
- from @profhankd I got the first 6 millimeters of the M42 screw htt
M42 lens to Canon EOS body adapter. Made as a remix from three "things". Many thanks to the authors. Well, it will take a while until I will be able to test it. If there are courageous, please test it...
Adapter assure a flange distance of 45.5mm, needed by M42 lenses to focus to infinity (EOS flange distance is 44mm so, it adds 1.5mm), but, as I have zero experience with 3D printing, there is no dimensions tolerance. However, this is intended to be printed on Prusa i3 using Cura 3D software, where material is PLA and the profile is set to High Quality (0.06mm), infill %100.
Now, what I got from those three things:
- from @SkyRzn I got the entire EOS bayonet, cut the extension tube and kept only 1.5mm from it; https://www.tinkercad.com/things/eZ0xn72o6Zj/
- from @jeng28 I got the secure hole and the index hole of the EOS flange; https://www.tinkercad.com/things/0lSVNIOYrTU/
- from @profhankd I got the first 6 millimeters of the M42 screw htt
Heb je dit model geprint? Inloggen en deel je make!
Log in om een reactie achter te laten
InloggenNog geen reacties – wees de eerste!