M5Stack NanoC6 Magnetic Mount

This is to magnetically mount the M5Stack NanoC6. It is designed for 6mm x 2mm magnets. I include STEP and Fusion 360 files for easy remixing. Features:Nice friction fit; arms are slightly tapered so they flex a little and maintain gripFront facing button + LEDReversible: works equally well with the USB-C or Grove connector facing up or downYou can install / remove the NanoC6 without unplugging any cables.Does not block connectors or ventilation slotsStrong part (sensible layer lines), no supports needed.Tips:Print on its base - same orientation as the photos - not on its back.Use a drop of CA glue to secure the magnet What do I use this for?I have a NanoC6 loaded with ESPHome firmware controlling a Mitsubishi Heat Pump (I started with this guide). Some heat pumps are wall mounted and the NanoC6 (or other ESP32) sits inside the units plastic enclosure. I have a larger ducted unit with a metal enclosure. The NanoC6 needs to sit outside the metal enclosure to get a Wifi signal, and this