MakerWorld
Hueforge & Lithophane
Zum Modell
Mac Miller - GOOD AM
31
Downloads
26
Likes
11
Makes
Mac Miller - GOOD AM Other Mac Miller fanart and other artist can be found here: https://makerworld.com/en/@Noahs_A_Noobie/upload Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mmThe Model is 200x199.37mm in sizeYou may print at higher layer heights below the Min Depth of 0.48mmThe Max Depth is 2.2mm and the Actual Depth is 2.3mm Filaments Used: PLA BambuLab Basic Black Transmission Distance: 0.6 PLA BambuLab Basic Gray Transmission Distance: 2 PLA Overture White Transmission Distance: 4.4 PLA BambuLab Basic Jade White Transmission Distance: 5This print uses 4 unique filaments IGNORE IF USING AMSSwap Instructions: Start with Black At layer #11 (0.96mm) swap to Gray At layer #16 (1.36mm) swap to White or Light Grey At layer #24 (2mm) swap to Jade White for the rest.
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
