Thingiverse
Mac Pi
von adafruit
656
Downloads
718
Likes
7
Makes
https://www.youtube.com/watch?v=D_duo8Wogsw
In this project, we’re going to show you how to build your own mini mac classic with 3d printing and the raspberry pi.
A PiTFT display mounts to the front bezel and is easily removable with magnets.
Boot into Mac OS 7 and run classic mac apps like mac pant.
The open source design is free to download and available to customize in your favorite CAD software.
The largest part takes 4 hours to print and only costs about 5 bucks in material.
This 5 part enclosure is optimized for desktop 3d printers using PLA filament.
You can get all the parts for this project on adafruit dot com.
Find how out assemble the circuit by checking out the project guide on the Adafruit learning system.
The PiTFT fits on top of the raspberry pi and the body and base parts are secured together with machine screws.
A slide switch connects to the powerboost 500C and a rechargable lithium battery.
The enclosure has enough space for a small
In this project, we’re going to show you how to build your own mini mac classic with 3d printing and the raspberry pi.
A PiTFT display mounts to the front bezel and is easily removable with magnets.
Boot into Mac OS 7 and run classic mac apps like mac pant.
The open source design is free to download and available to customize in your favorite CAD software.
The largest part takes 4 hours to print and only costs about 5 bucks in material.
This 5 part enclosure is optimized for desktop 3d printers using PLA filament.
You can get all the parts for this project on adafruit dot com.
Find how out assemble the circuit by checking out the project guide on the Adafruit learning system.
The PiTFT fits on top of the raspberry pi and the body and base parts are secured together with machine screws.
A slide switch connects to the powerboost 500C and a rechargable lithium battery.
The enclosure has enough space for a small
adafruit veröffentlicht auch auf
1 zusätzliche Modelle auf 1 weiteren Plattformen
Hast du dieses Modell gedruckt? Einloggen und dein Make teilen!
Melde dich an, um einen Kommentar zu hinterlassen
AnmeldenNoch keine Kommentare – sei der Erste!
